24" Long 2-Sided Modern Matte Black Door Handles, Stainless Steel Door Handle Pulls for Commercial Glass Entrance Sliding Barn Doors Home Interior Exterior Single or Double Doors, Flat Curved Bar
3 sold in last 24 hours
- FLEXIBLE APPLICATION: KeyTiger's CONTEMPORARY, MODERN door pull/handle designs guarantee to bring out the elegance of your home. Perfect as door pull entrance/entry handle, push pull door handle bar, bathroom glass door pulls, shower door handle, sliding barn door pull handle, on big/large interior or exterior front door, shops, kitchen door, gate, wine cellar, shed/garage. Mountable on wood door, glass door, fiberglass door, metal door, etc.
- PRODUCT DETAILS: Part Number: KT3254-600-4010-07|2-SIDED HANDLES| Exact LENGTH of the Handle: 23.6 inches| HOLE DISTANCE (distance between the drilled holes or "Center-to-Center Mounting" in dimensional image below): 15.8 inches| Cross Section/FRONT*SIDE ("F*S" in variation options): 1.6*0.4 inches|FINISH of THIS SELECTED product: Matte Black-Painted Finish---OTHER existing finishes of KeyTiger handles: Brushed Stainless Steel|Chrome Mirror-Polish|Antique Bronze|Copper|Satin-Nickel|Gold-Plated
- 2-SIDED HANDLES: A single purchase (1 unit) of this product provides you with 1x 2-SIDED pulls/handles for front/back (inside/outside, back-to-back) single door application. For double door applications, 2x 2-SIDED are required. 1x 2-SIDED handles cannot be split and used for single-side application on 2 separate doors (use 2x 1-SIDED pulls for this). These door handles/pulls DO NOT LOCK and are typically used in conjunction with deadbolt hardware and/or door catches.
- EASY INSTALLATION: Every purchase comes with a ziplock bag which contains installation accessories, including longer bolts to work for up to 2.7 INCHES THICK DOORS, with a PROJECTION GAP of 1.65" when measured from the neck (ends) and 2.3" when measured from the middle of the bar. DRILLED HOLE SIZE: Typically, a diameter of 0.315" - 0.600" (1/2" or 0.500" is recommended) should work but always verify by measurements. NOTE: Reach out to us for any missing installation items.
- DURABLE & TIMELESS: Handleset parts made from high-strength, high-endurance stainless steel 304 alloy material (austenitic-grade: HIGH nickel and chromium) providing ULTRA-STRONG resistance to rust, corrosion, stain, and deformation; perfect under any weather condition, suitable for both indoor and outdoor hardware applications. ADDITIONAL SPECIAL PASSIVATION PROCESS performed on finished stainless steel for self-healing properties. FOR AUTHENTICITY, look for the KeyTiger label on the packaging.
Estimated shipping
Select a product to estimate shipping.FEATURED ON HBO SILICON VALLEY SEASON 4
KeyTiger 's contemporary and modern design added a hip and professional feel to the offices of Erlich Bachman, Laurie Bream, and Monica Hall in their Bream|Hall set.
Product Finish : The product images of the finish are fairly accurate representations. There might be some minor differences between the images and how the finish looks in person due to lighting in a studio.
Warrranty: All door handles & pulls come with a 12-month KeyTiger Manufacturer OEM warrranty and email/phone support.
Installation Accessories (Ziplock Bag/Small Box):
Every purchase of the selected product comes with installation accessories, including longer bolts to work for up to 2.7 INCHES THICK DOORS.
For missing installation items, please reach out to us and we will send the item(s) for free.
Key details of the selected product:
Finish/Color: -07 Matte Black-Painted Finish (Powder Coated)
2-SIDED HANDLES: A single purchase (1 unit) of this product provides you with 1x of 2-SIDED door pulls or handles for back-to-back (front/back, inside/outside) application on a single door .
For double-door applications , 2x of 2-SIDED are needed .
IMPORTANT: All 2-SIDED handles must be installed back-to-back. Do NOT split these handles to install them on only one side of a set of double doors.
PART NUMBER DETAILS:
Length: 23.62" (NOTE: TOTAL LENGTH OF THE HANDLE IS NOT THE SAME AS DRILLED HOLE DISTANCE OR CENTER-TO-CENTER DISTANCE)
Cross-section of the door handle/pull: 1.57" x 0.39"
Drilled hole distance or center-to-center mounting: 15.75"
Drilled hole diameter/size: 0.315" - 0.600"
Door thickness compatibility: Works for up to 2.7" thick doors
Projection gap: 1.65" when measured from the neck of the handle to the surface of the door, 2.3" when measured from the middle of the bar to the surface of the door.
Measurements of the selected product (Dimensional Image)
DRILLED HOLE DIAMETER/SIZE FOR THE SELECTED PRODUCT:
Each hole should be more than the diameter of the threaded bolt and less than the diameter of the bolt head. Typically, a diameter of 0.315 - 0.600 inches (1/2" or .500" is recommended) should work but always verify by measurements.
IMPORTANT NOTES:
KEYTIGER PRODUCTS ARE INTENDED FOR NEW DOOR APPLICATIONS AND NOT MEANT TO BE RETROFITTED INTO AN ALREADY EXISTING DOOR THAT HAS HOLES DRILLED IN THEM. HOWEVER, IT CAN BE USED ON EXISTING DOORS ONLY IF THE CENTER-TO-CENTER MOUNTING (DRILLED HOLE LOCATIONS) ON YOUR DOOR EXACTLY MATCHES THE CENTER-TO-CENTER LENGTH AS SPECIFIED ON THE PRODUCT DIAGRAM AND TECHNICAL DETAILS.
Do not use as pulls or handles for cabinets, refrigerators, and other furniture and appliances.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
APPLICATION GRAPHIC
VARIOUS DOOR HARDWARE CONFIGURATIONS
PRODUCT COMPARISON CHART
OTHER KEY FEATURES OF KEYTIGER DOOR PULLS AND HANDLES
SUPERIOR QUALITY
Made from high-strength, high-endurance Stainless Steel 304 alloy material, making it resistant to rust, stain, corrosion, and deformation for a timeless feel.
DOOR HARDWARE COMPATIBILITY
These door handles/pulls do NOT lock and do NOT have a lock. They are typically used in conjunction with other door hardware to lock or hold the door in place. See Application Graphic for reference.
EASY INSTALLATION
Click the Installation Manual [PDF] under "Product guides and documents" to view the written installation instructions and embedded video .
Product details
| Main Specification | |
|---|---|
| Menangani Bahan | Baja Stainless or Perunggu or Wood or Kaca or Tembaga |
| Tipe Metal | Baja Stainless or Perunggu or Tembaga |
| Bentuk | Datar or Kurva |
| Manufaktur | Keytiger Door Pulls & Handles |
| Cacah Unit | Cacah 1 |
| Selesai Eksterior | Matte Black |
| Orientasi Tangan | Ambidextrous |
| Brand | Keytiger |
| UPC | 635231549372 |
| Jumlah Objek | 1 |
| Komponen Sertakan | All mounting accessories provided |
| Dimensi Produk | 23.6"L X 1.57"W |
| Kedalaman Butir | 1-2 Inches |
| Materi | Baja Stainless |
| Warna | Matte Black-Painted Finish |
| Gaya | Deco Seni |
| Butir Berat | 3,2 pounds |
| Product information | |
| Tipe Paket Pelanggan | Paket Standar |
| Technical Details | |
| Nomor Bagian Manufaktur | KT3254-600-4010-07 |
| Jarak Tengah Ke Tengah | 15.8 inches |
| Menangani Mekanisme Lampiran | bolt |
| Jarak Proyeksi | 1.65 Inches |
| Jenis Material | Baja Stainless |
| Jenis handle | Tarik Handle |
| Menangani kompatibilitas | Universal |
| Item details | |
| Nomor Model | Vanderbilt |
| Style | |
| Nama Gaya | Deco Seni |
| Selesai Tipe | Lapisan bubuk |
| Features & Specs | |
| Fitur Tambahan | Mudah dipasang |
| Others | |
| Tipe Produk | Handlesets |
| Dimensi Butir L x W | 23.6"L x 1.57"W |